-16-
g0664 heavy duty Metal-Cutting Bandsaw
Moving & placing
the base of the Model g0664 contains four lift-
ing points to allow the machine to be moved into
position.
To move the machine:
1. remove the four lag screws that mount the
machine to the pallet at the base of the ship-
ping crate.
2. insert round steel bars through the lifting
holes and attach lifting hooks and straps to
the bars as shown in
figure 8.
The Model G0664 is a
heavy machine. Serious
personal injury may
occur if safe moving
methods are not used. To
be safe, get assistance
and use power equip-
ment to move the ship-
ping crate and remove
the machine from the
crate.
figure 8. g0664 lifting points.
3. lift the machine just high enough to clear the
pallet, then move it to its final location. have
an assistant stabilize the machine while mov-
ing.
—if you plan to use the leveling feet rather
than mounting the machine to the floor, set
the machine on blocks at least 4" above
the ground before putting it in the final
location, then proceed to
Leveling feet on
page 18.
4. re-install the coolant reservoir cover/catch
tray.
