Grizzly G0555XH, Руководство пользователя, Страница: 18 / 72

-16-
Model G0555XH (Mfd. Since 1/18)
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
G
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Figure 10. Box 1 inventory.
C
Figure 11. Box 2 inventory.
D
E
Figure 12. Hardware bag inventories.
Inventory (Figures 10–12) Qty
A. Main Bandsaw Body (not shown) .............. 1
B. Table .......................................................... 1
C. Table Insert ................................................ 1
D. Fence Face ................................................ 1
E. Miter Gauge ................................................ 1
F. Fence Base Assembly ............................... 1
G. Fence Rail .................................................. 1
H. Hardware Bag(1) ........................................ 1
— Open-End Wrench 10/13mm .................. 1
— Table Gap Screw Assembly ................... 1
— Hex Nuts M8-1.25 ................................... 2
— Flat Washer 8mm ................................... 1
— Hex Wrench 5mm ................................... 1
— Hex Wrench 8mm ................................... 1
—Hex Bolt M8-1.25 x 80 (Positive Stop) ... 1
— Trunnion Knobs ...................................... 2
I. Hardware Bag(2) ........................................ 1
— Hex Bolts M6-1 x 20 ............................... 2
— Lock Washers 6mm ................................ 2
— Flat Washers 6mm ................................. 2
—Fence Face Adjustable Handle .............. 1
— Flat Washer 8mm ................................... 1
— Fence Guide Plate .................................. 1
— Fence Base Lock Lever .......................... 1
— Hex Nut M8-1.25 .................................... 1
J. Hardware Bag(3) ........................................ 1
—Fence Support ........................................ 1
— Flat Washers 6mm ................................. 2
— Cap Screws M6-1 x 12 ........................... 2
K. Hardware Bag(4) ........................................ 1
—Rubber Feet ............................................ 4
—Hex Nuts 3/8-16 ...................................... 8
—Flat Washers 10mm ............................... 8
F
B
G
I H
J
K