manualshive.com logo in svg

Grizzly EXTREME G0513X, Руководство пользователя, Страница: 23 / 92

Поделиться
Скачать
Grizzly EXTREME G0513X Скачать руководство пользователя страница 23

G0513X/G0514X/G0514X3 Extreme Series Bandsaw

-5-

The information contained herein is deemed accurate as of 2/9/2007 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 2 OF 2

Model G0513X

Table Information

Table Length........................................................................................................................................ 23-5/8 in.

Table Width.......................................................................................................................................... 17-1/4 in.

Table Thickness..................................................................................................................................... 1-1/2 in.

Floor to Table Height............................................................................................................................37-1/2 in.

Fence Information

Locks in Front............................................................................................................................................... Yes

Locks in Rear..................................................................................................................................................No

Adjustable for Blade Lead.............................................................................................................................Yes

Construction

Table Construction...................................................................................................Precision Ground Cast Iron

Rip Fence .................................................................. Cast Iron Fence with Extruded Aluminum Resaw Fence

Base Construction......................................................................................................................... Formed Steel

Body Construction......................................................................................................................... Formed Steel

Upper Wheel........................................................................................................Computer Balanced Cast Iron

Lower Wheel........................................................................................................Computer Balanced Cast Iron

Tire Material................................................................................................................................... Polyurethane

Wheel Cover .......................................................................................................................... Pre-Formed Steel

Paint........................................................................................................................................... Powder Coated

Other Related Information

Wheel Diameter................................................................................................................................... 16-3/4 in.

Wheel Width...........................................................................................................................................1-1/4 in.

Number of Dust Ports........................................................................................................................................2

Dust Port Size.............................................................................................................................................. 4 in.

Mobile Base..............................................................................................................................................G7314

Other Specifications:

ISO Factory ...................................................................................................................................................ISO 9001

Country Of Origin ..............................................................................................................................................Taiwan

Warranty ............................................................................................................................................................ 1 Year

Serial Number Location ................................................................................................................ Label on Top Cover

Assembly Time .................................................................................................................................................. 1 hour

Features:

Ball Bearing Blade Guides

Quick Change Blade Release/Tensioner

Magnifying Window Over Fence Scale

Micro Adjusting Geared Table

Height Scale Measurement

Blade Tracking Window

Hinged Wheel Covers

Deluxe Cast Iron Fence with Extruded Aluminum Resaw Fence

Miter Gauge

Includes 1/2" Blade

Содержание EXTREME G0513X





























































































Отзывы:

Нет отзывов