UK
86
- Before you conduct maintenance or
cleaning work on the tool
- If the mains cable is damaged or
caught up
- If the tool collides with an obstacle
or starts to vibrate in an unusual man-
ner. In this case, examine the tool
for damage, and have it repaired if
necessary.
• Use the tool away from flammable
fluids or gases. Failure to do so may
result in fire or explosion.
Maintenance and storage:
• Make sure that all nuts, bolts and
screws are tight and that the tool is in
safe working order.
• Do not attempt to repair the tool your-
self unless you are qualified to do so.
Return the tool to our service centre
to carry out any work not listed in the
user manual.
• Keep the tool in a dry place out of chil-
dren’s reach.
• Be careful in handling the tool. Keep
the tines sharp and clean to improve
its working safety and effectiveness.
• Follow the maintenance regulations.
Electrical safety:
Warning! Do not use the tool if the
mains or extension cable is dam-
aged – danger of electrical shock.
• Before each use, check the mains
cable and the extension cable for dam-
age and aging. Do not use the equip-
ment if the cable is damaged or worn.
• If the connecting cable to this equip-
ment is damaged, it must be replaced
by the manufacturer, the customer ser-
vice of the same, or a similarly quali-
fied person in order to avoid hazards.
• Make sure that the mains voltage
matches the data on the tool’s rating
label.
• If possible, connect the tool to a socket
with a residual-current circuit breaker
(RCD) trip switch at a triggering current
of not more than 30 mA.
• Avoid skin contact with earthed ob-
jects such as metal fences and posts.
• Make sure that the connector on the
extension cable is protected from
splash water, and is made of rubber
or has a rubber covering. Only use
extension cables that are intended for
outdoor use and are labelled as such.
Use extension cables with a cable
core diameter of at least 2,5 square
millimetre. Always completely unwind
the cable reel before use. Check the
cable for damage.
•
Use the cable hanger fitted for the pur
-
pose when using an extension cable.
• Do not carry the tool by the cable. Do
not unplug the cable by tugging on it.
Keep the cable away from heat, oil
and sharp edges.
Functional description
Your hand-operated garden tiller is
equipped with a maintenance free electric
motor and a gearbox with sump lubrication.
The tool is fitted with six rotating tine
wheels that automatically dig themselves
into the ground.
The steel frame can be folded to aid stor-
age.
Please refer to the following descriptions
for the function of the controls.
The major functional parts are
shown on page 2 and 3.
Содержание EGT 1345
Страница 2: ...1 3 2 4 5 6 7 9 10 11 12 13 14 15 16 17 8...
Страница 3: ...6 5 2 7 9 5 2 15 6 3 4 18 19 20 10 21 22 23 11 16 16 15 16 22 5a...
Страница 132: ......