English
27
C.
Close the unit again by tighten the screw
“6”
previously re-
moved.
6.5 Gobo installation
The gobo size is Ø53.3 mm with image Ø40 mm.
The size is compatible with standard “D size”.
A.
Untighten the screw
“11”
and remove the lower cover.
B.
Untighten the knob
“12”
and move sideways the lenses.
12
11
6
Warning!
All data wires must be isolated one from another, from the shield and from the metal housing of the connectors.
Pin number 1 of the housing is not to be connected to the electric ground of the unit.
Insert a 120 Ω resistor connected to Data+ and Data- in the last unit.
