Griven AL1419, Инструкция по эксплуатации

Страница: 18 / 20

5.0 WARRANTY CONDITIONS
• Each product manufactured by GRIVEN srl of Italy is assembled and built in accor-
dance to current CE conformity rules and regulations.
• Every single product and component has been tested before the final assembling
and all products must pass the in-house quality control before they are shipped.
• GRIVEN srl of Italy guarantees the good quality and manufacture of the products
and undertakes to repair or supply again, according to his opinion and free of
charge, within the shortest time possible, any part that shows - during the guar-
antee period - defects of constructions, manufacture or material.
• The guarantee is valid for 12 (twelve) months starting from the delivery date of the
products.
• GRIVEN srl of Italy does not respond for damages occurred to the units during
transport and for irrational use and inaccuracy in regular maintenance of the
products.
• The guarantee excludes all consumables.
• The customer will take care of the return of the faulty parts to GRIVEN srl of Italy,
at his own charge and risk.
• The parts which have been repaired or replaced are sent by GRIVEN srl of Italy ex-
factory.
• For any dispute, the Court of Mantova (Italy) will be competent and in conformi-
ty with relevant jurisdiction the Italian Law is enforced for any controversy.
6.0 COMPLIANCE
• Product in compliance with EN60598-1 EN60598-2-17.
• Product in compliance with 2002/95/CE (RoHS).
7.0 TECHNICAL INFORMATION
LED DOP CONTROLLER
Operating voltage 230/240 Vac
Operating frequency 50/60 Hz
Protection rating IP65
Operating temperature -20 / 40 °C
18