Griven AL1419, Инструкция по эксплуатации

Страница: 12 / 20

1.0 PACKING
Check carefully the content of the box and in case of damage contact your for-
warder immediately.
The following items are included in the box:
n° 1 LED DOP CONTROLLER ;
n° 1 box GEWISS - "PLAYBUS" GW30 924;
n° 1 transformer;
n° 1 supply filter
n° 1 Instructions leaflet.
2.0 INSTALLATION
LED D.O.P. CONTROLLER can be fitted into the wall with a box GEWISS - "PLAYBUS"
GW30 924.
2.1 Electrical Connection
The following picture shows the connection to the terminal boards at the rear of LED
D.O.P. CONTROLLER . Please connect the power supply filter to the transformer input,
as shown in the picture.
Pin 1: n.c.
Pin 2: n.c.
Pin 3: DMX output data +
Pin 4: DMX output data -
Pin 5: DMX output data GND
Pin 6: analogic output 0-10V ch4
Pin 7: analogic output 0-10V ch3
Pin 8: analogic output 0-10V ch2
Pin 9: analogic output 0-10V ch1
Pin 10: analogic output 0-10V GND
Pin 11: power supply 12V AC
Pin 12: power supply 12V AC
Pin 13: n.c.
Pin 14: n.c.
Pin 15: n.c.
The DMX signal is to be connected by using a shielded cable designed for devices
RS-485, 2-pole + hose (Hose:GND, Pin1:Data+, Pin1:Data-).
12
Calza
Data + Data - GND
Sez. min.
0.35 mm