Gripe Rite GR309EDV, Руководство по эксплуатации и список запасных частей

Страница: 10 / 22

OPERATION
STARTING COMPRESSOR
Pre-starting Checklist:
Always check and correct before starting:

Check unit for missing parts or damage.

Check for loose nuts and bolts.

Check drain cocks and close if open.

Check compressor oil level.
1. Move On/Off lever (A) to the "OFF" position.
2. Plug the power cord into the power
receptacle.
3. Move On/Off lever (A) to the "ON" position.
4. Leave compressor in “ON” position while in
use.
5. Adjust outlet air pressure to desired setting by
turning pressure regulator knob “B.” Turn
knob clockwise (+) to increase air pressure,
counterclockwise (-) to decrease air pressure.
Outlet air pressure is indicated by gauge (C).
Tank pressure is indicated by gauge (D)
6. Connect air hoses to quick-connect fittings (E)
using a male quick-connect fitting. To
connect air hose, push back outer ring on
compressor fitting, insert male hose connector,
and release ring. To release air hose, push
hose fitting in, push back outer ring on
compressor fitting, and pull male hose
connector out.
7. To stop compressor, move On/Off lever (A) to
the "OFF" position. DO NOT stop
compressor by unplugging power cord.
WARNING
High pressure air will escape when hose is disconnected. Keep face away from
fittings to prevent dirt and debris from being blown into eyes. Always wear safety
glasses with side shields to protect eyes when using compressor.
9