17
18
To restore back to
normal operating
conditions, press
any button or lift
the
Lever
and the
machine will start
warming up.
When all the button
lights turn on and
remain steadily
lit, the machine is
ready to use.
The machine will
automatically
reduce power
consumption 10
minutes after last
use.
All the buttons
will slowly and
sequentially blink.
Remove and
empty the
Drip
Tray
and
Used
Capsule Drawer
.
Rinse with fresh
water, reassemble
and replace onto
machine.
When the button
lights turn on and
remain steadily
lit, the machine is
ready for use.
DESCALING INSTRUCTIONS - Continued
SAVING ENERGY
1.
3.
2.
4.
17.
18.
10 Min
RESTORE FACTORY SETTINGS (RESET)
These instructions allow you to reset the machine back to its factory setting – helpful if you
experience an issue with the machine, or you have changed the pour levels for example, and cannot
change them back to their original settings.
If your machine hasn’t entered into
Prime
mode, please repeat from
Step 1
. The
timing of
Closing
and
Opening
the
Lever
is precise & may take a couple of attempts
before successful. If you have reset the
machine and the problem still continues,
please contact
Grinders National Sales
Centre
. Details on the front cover.
Switch
ON
the
machine using
the
On/Off
Switch
,
then after 1
second, close and
open the
Lever
within 1 second.
The button lights
will flash and the
RED
Indicator Light
will blink indicating
your machine now
needs to be
Primed
as directed in
‘First
Time Use’
.
The machine will
beep to signal
the reset has
been done, then
release the
Single
Espresso button
.
Ensure the
Lever
is up and switch
the machine
Off
using the
On/Off
Switch
.
Hold down the
Single Espresso
button
for the
whole of
Step 3
and
Step 4
.
3.
5.
4.
i.
1.
2.
OFF
ON
