Grinders Little Collins, Инструкция по эксплуатации

Страница: 6 / 13

9 10
i.
DISPENSING HOT WATER
All the button
lights will flash
simultaneously for
approx. 60 sec. until
your machine has
warmed up.
Switch the machine
ON using the On/
Off Switch. Top up
the
Water Tank
if
required.
When all the
buttons are steadily
lit the machine is
ready for use.
Press and release the
Hot Water button
. The
Hot Water button will
flash. Dispensing stops
when the programmed
amount is reached or
press the button to stop
dispensing in advance.
WARNING!
Only use the
Hot Water
button (lit in BLUE ) for
dispensing hot water.
Dispensing coffee using
this button will damage
your machine & void
your warranty.
2.
4.
1.
3
ON
Note: The quantity of beverage dispensed
can be programmed according to personal
taste and the size of the cups or mugs
used. Please refer to ‘Programming the
Quantity of Beverage in a Cup’ on Page 11 .
TURNING ON THE APPLIANCE
- DAILY USE
ADJUSTING THE CUP/MUG HEIGHT
Your machine can be adjusted for the use of mugs or espresso cups.
This raises the
height of the
cup towards the
Dispensing Spout .
For tall mugs,
the Drip Tray can
be detached and
removed.
When all the
button lights are
steadily lit, the
machine is ready
to use.
Plug your machine in
and switch it
ON
using
the On/Off button . All
the button lights will
flash simultaneously
for approx. 60 sec.
until your machine
has warmed up.
Open the
Water
Tank Cover & fill
the Water Tank
with fresh water
to the
Max. Line
indicated .
Your machine is
initially set for the
use of large cups
or mugs.
For best results
using espresso
cups, you can lift
and rotate the Grid
placed over the
Drip Tray .
3.
3.
2.
4.
1. 2.
1.
ON
WATER