Grillo 11500, Использование и обслуживание

Страница: 12 / 60

10
NOISE LEVELS
The machine’s noise level was measured in accordance with the EN 709 standard by the Institute
of Agricultural Engineering, Bologna University.
The noise levels were measured using a Bruel & Kjaer measuring device, serial number 1178097,
complying with IEC804, IEC651-1I, ANSI S1.4-1983 and a B&K microphone complying with IEC651.
The noise levels were measured in an area free from obstacles over a radius of at least 20 m. and
with the engine at normal operating temperature.
The data given below refer to draft standard CEE PrEN 1553: 1994-annex B.
Ambient pressure 760 mmHg;
Temperature 3
°
C;
Relative humidity 85%;
Wind speed below 0.5 m/s (and thus the correction constant due to background noise is equal to
zero).
90.1 90.1 89.9
90.1
1) 2) 3) conventional mean
Engine speed 3060 rpm
(noisiest side Left).
11500 MOTOR HOE
Equivalent acoustic pressure level in the driving position [db(A)]
VIBRATION LEVELS
The vibrations levels were measured by the Institute of Agricultural Engineering, Bologna University.
in accordance with the draft standard CEN PrEN 709: 1994 and standard 1033.
The weighted mean hand acceleration values calculated under the ISO standards are shown in
the table below:
Ambient conditions:
Ambient pressure 770 mmKg;
Temperature 11
°
C;
Relative humidity 92%;
11500 MOTOR HOE
Engine speed:
3600 rpm nominal without load, and 3060 during the test
Forward direction
Transverse direction
Vertical direction
a
eq
6,54
1,85
3,16
5,42
a [m/s 2 ]
hw
TIPPING ANGLE