4
The machine has to be steady and solidly anchored to obtain the best performance.
Base plate for the installation: Installation and anchoring of this machine does not normally require foundation bolts. If
required, Fig. 2- 2A – 2B shows the sizes of 8 foundation bolts.
Check levelling until the base plate rests on a flat surface:
insert shims (2) under the adjusting screw (1) Fig. 3-
Place a gauge (4) on the machine table, preferably in the machine central part.
Adjust the machine using adjusting screw (1); error tolerance is ± 0.1mm/m
Anchor the machine to the floor by fitting expansion bolts in the holes in the support platforms.
6.
TECHNICAL DATA
6.1.
TECHNICAL FEATURES G 240 P4
NO.
Item
Unit
Technical
parameter
Width
mm
20-230 (for the
cutter diameter <
Ø130mm)
1
Size of workpiece
Thickness
mm
8-160 (for the
cutter diameter <
160mm)
2
Feeding speed
m min
-1
6-24
Length
mm
2000
3
Infeed table
Height adjustment
mm
10
4
Adjustable distance for pre-planer fence
mm
10
5
Adjustable distance for outfeed table (pad addition)
mm
Max. 1
Speed
r min
-1
6000
Planer shaft diameter
mm
Ø 40
Tools min/max diameter
mm
Ø 110 - Ø 145
Profile cutter max
length
mm
250 (including
shaving milling
machine)
Shaving milling
machine OD
mm
20mm larger than
profile cutter
Shaving milling
machine thickness
mm
12
Max removal
mm
10
Vertical movement
Horizontal movement
mm
mm
20
20
6
Il 1st lower horizontal planer shaft
Motor power
kW (HP)
5,5 (7,5)
Speed
r min
-1
6000
Planer shaft diameter
mm
Ø 40
2
nd
shaft tools min/max
diameter
mm
Ø 125 - Ø 200
3
rd
shaft tools min/max
diameter
mm
Ø 110 - Ø 200
Milling cutter max
length
mm
180
Max removal
mm
10
Vertical movement
Horizontal movement
mm
mm
40
60
7
2nd and 3rd vertical planer shaft
Motor power
kW (HP)
2×5.5 (2x7.5)
