DG Spin
I
ntroduction
1-1
1
INTRODUCTION
THIS EQUIPMENT IS AN
IN VITRO
DIAGNOSTIC MEDICAL DEVIDE
(IVD).
These Instructions for Use, which are intended for the OPERATORS of the
DG Spin
incubator, contain all the information that is necessary for safely and
adequately working with the instrument.
Please carefully read all this information before attempting to work with the
equipment, especially on the maintenance section, the suggestions for correct use
and the information about contaminating liquids.
If you have any doubt please contact the manufacturer or corresponding
distributor before starting any operation.
These Instructions for Use should be accessible to all the personnel who work with
the instrument.
1.1
Intended use
The centrifuge
DG Spin
enables centrifugation of
DG Gel
cards.
1.2
Purpose, limitations and operators training
1.2.1
Purpose
The
DG Spin
centrifuge has been especially designed to carry out centrifugation of
a maximum of 24
DG Gel
cards in one batch
.
Therefore, the predefined
parameters in the instrument (speed and time) are those required to work with
this type of card.
1.2.2
Limitations
The
DG Spin
centrifuge is only prepared for the centrifugation of
DG Gel
cards as
described in section 1.1 "Intended use", and should not be used for any other type
of test different to those for which it was designed.
1.2.3
Training
Use of the
DG Spin
centrifuge does not require specific training beyond that
established by the laboratory itself.
