Grifo SEP 40, Руководство пользователя

Страница: 95 / 118

ITALIAN TECHNOLOGY
grifo ®
Page 85
SEP 40 Rel. 3.10
Select the base in „Style“ options before entering numbers of serial start value and step.
Save to buffer
Save to buffer option specifies the serial value byte order to write to buffer. This option is used
for Bin S / N mode (for ASCII mode it has no effect).
Two options are available:
- LSByte first (used by Intel processors) will place the Least Significant Byte of serial number
to the lowest address in buffer.
- MSByte first (used by Motorola processors) will place the Most significant Byte first to the
lowest address in buffer.
Device / Device options / Serialization / From file mode
Using the From-file method, serial values are read from the user specified input file and written
to buffer on address specified in input file.
There are two user options: File name and Start label.
File name
File name option specifies the file name from which serial addresses and values will be read. The
input file for From file serialization must have special format, which is described in From file
serialization file format below.
Start label
Start label defines the start label in input file. The reading of serial values from file starts from
defined start label.
From file serialization file format
From file serialization input file includes addresses and arrays of bytes defining buffer addresses
and data to write to buffer. Input file has text type format, which structure is:
[label1] addr byte0 byte1 .. byten
...
[labeln] addr byte0 byte1 .. bytem , addr byte0 byte1 ... bytek
\_______________/ \__________________/
| |
basic part optional part
; Comment
meaning is:
basic part
Basic part defines buffer address and array of bytes to write to buffer. Basic part must be always
defined after label in line.
optional part
Optional part defines the second array of bytes and buffer address to write to buffer. One optional
part can be defined after basic part of data.
label1, labeln - labels
Labels are identifiers for each line of input file. They are used for addressing each line of file. The
labels should be unique. Addressing lines of file means, the required start label entered by user
defines line in input file from which serial values reading starts.