Grifo SEP 40, Руководство пользователя

Страница: 107 / 118

ITALIAN TECHNOLOGY
grifo ®
Page 97
SEP 40 Rel. 3.10
Options / Automatic YES!
This command is used for setting Automatic YES! mode. In this mode you just put a device into
ZIF socket and a last operation will be repeated automatically. Program automatically detects an
insertion of a new device and runs last executed operation without pressing any key or button.
An insertion of device into ZIF is displayed on the screen. Repeated operation executing will be
cancelled by pressing key <Esc> during waiting for insert/remove a device to/from ZIF.
Note: During waiting for an insertion a new device into ZIF socket, the LED BUSY on the
programmer is blinking.
This mode may be enabled or disabled by item Automatic YES! mode. If a new programmer is
selected Options / Find programmer, this mode will be disabled.
In Response time is possible to set a time interval within must be detected device in ZIF socket
to accept an insertion of a new device. Default is set standard interval. If socket adapter is used
then is recommended to set an elongated interval.
In Pins with capacitors bar may be entered a list of a pins interconnected by capacitors (for
example: if a converter, which have connected capacitor between VCC and GND, is used), which
may makes problems at detecting insertion of a new device.
List of pins of device is in form:
pinA, pinB, pinC....
Example: 4,6,17
This list is erased if a new device is selected by Device / Select default or Device / Select device
...
This setting is saved to disk by command Options / Save options.
Options / Log file
This options associates with using of Log window. All reports for this window can be written into
the Log file too. The Log file name as REPORT.REP and the control program creates this file
in current directory.
Sets New caused deleting old Log file if exist and creating a new file for reports. Sets Append
adds all reports into existing Log file. If file not exist, the new file will be created. Settings are
applied only at program start.
This setting can be saved to disk by command Options / Save options. Default form is set to a
using Log window without Log file i.e. all reports will be displayed to a Log window only.
Options / Protected mode
Protected mode is special mode of program. When program is in Protected mode, there are
disabled program operation and commands which can modify buffer or device settings. Protected
mode is used for prevent operator from modify buffer or device settings due to insignificance.