Grifo SEP 40, Руководство пользователя

Страница: 113 / 118

ITALIAN TECHNOLOGY
grifo ®
Page 103
SEP 40 Rel. 3.10
<F6>.
- SEP 40 can perform a self test to assure the correct working of its internal components. Select
menu Diagnostics and follow the on screen instuctions. Please remark that self test must be
performed with ZIF socket empty, otherwise both the programmer and the device inserted
will be damaged, and that self test plus must be performed with the specific diagnostic POD
inserted in the ZIF socket.
Please refer to figure 7 to see how to insert correctly the diagnostic POD.
- Some devices protect the content of their EPROM thorugh protection fuses. These fuses must
be disengaged (using the specific options in Device/Device Options and Device/Program
menus). Otherwise programming or reading one of these devices results impossible, even if the
device itself, the programmer and the PC are working correctly.
UNSUPPORTED TARGET DEVICE
If You need to operate on a target device not supported by the control program for programmer, please
do not despair and follow the next steps:
- Look in the device list of the latest version of the control program on our Internet site (section
Download, file corresponded to your programmer). Your new target device might already be
included in this version! If yes, download the file PG4UARC.EXE (for DOS) or
PG4UWARC.EXE (for WIN) and install the new version of the control program.
- Contact grifo
®
directly. We may need detailed data sheets of your target device and, if possible,
samples. The samples will be returned to you after we include your target device in a new
version of PG4U.