Greystone DataFast D-101, Руководство пользователя

Страница: 30 / 36

4-4 D-101 DataFast User’s Manual
Remote Operation
4-2.1 Begin Drive 0 Operations with D-101
When you select this option, the local IDE hard drive becomes either
the source or target drive, depending upon how you set up the D-101.
All D-101 disk drive operations can be performed on the selected drive
without the need to physically remove the drive and cable it to the D-101.
The current selected local drive is displayed in the menu heading. Once
you have selected this option, return to the D-101 and run jobs just as you
normally would.
PC Screen:
D-101 Screen:
Use the SRCE/TARGET selection from the D-101 main menu to select
either the source or the target to PAR, to establish communication
through the parallel port to the remote computer. Select the desired
operation using the STANDARD JOBS selection on the D-101 MAIN
MENU. Then begin the job using the START key.
Remote Drive 0 Operation
Press <ESC> to exit
-----------------------------------------
------
Fri, 09 Jul 1999 09:35:27 AM
Status: Disk is free... Press <ESC> to Exit
MAIN MENU
* S T A N D A R D J O B S
S R C E = I N T T A R G E T = E X T
S E L = S E L E C T