Greystone DataFast D-101, Руководство пользователя

Страница: 22 / 36

3-8 D-101 DataFast User’s Manual
Operation
Wipe Disk
This mode is used to erase the target drive by filling each sector with zeroes.
The “
Wipe Disk ” option enables you to allocate the area of the drive you
want to be erased. The default values are set for the full disk: Front MB
= 65535 and Back MB = 0. If you only want a portion of it erased, you
can specify different Front (begin) and Back (end) parameters. To change
the settings, press “SEL” to select front or back and use the
éê
keys to
change the values in 100 MB increments.
To start “Wipe Disk”, press “START”. The next screen will prompt you
to confirm the action to start. Press “START” again.
The next screen will display a progress bar showing % completed in 5%
increments or the file name during the copy process, the transfer speed and
estimated time remaining.
You can press “STOP” at any time do discontinue the Wipe Disk process.
Press “ESC” to return to the Wipe Disk menu. To view the copy log for
more details about the job, press “SEL”.
3-2.4 SRCE=INT TARGET=EXT
This section describes the settings that are available through the
“SRCE=INT TARGET=EXT” option in the “Main Menu”.
Use the
éê
keys to scroll line three for the available options.
W I P E D I S K
F R O N T = n n n n n
B A C K = 0
E S C = E X I T S T A R T = S T A R T
M A I N M E N U
S T A N D A R D J O B S
S R C E = I N T T A R G E T = E X T
S E L = S E L E C T