Greystone DataFast D-101, Руководство пользователя

Страница: 20 / 36

3-6 D-101 DataFast User’s Manual
Operation
Mirror Copy
The disk Mirror Copy mode is valid only for target drives which have the
same number of cylinders, heads and sectors per track as the source drive.
For Mirror Copy mode, the maximum number of megabytes to be copied
must be defined. To duplicate identical drives, zero (0) for the back
megabytes, and 65535 (maximum) for the front megabytes is normally
set. This ensures that the entire drive is copied sector for sector.
The first line can be “Mirror Copy” plus additional text “Vfy n%” if verify
has been specified. The second and third lines are used to set the Front
(begin) and Back (end) parameters to limit the copy to specific parts of the
source drive. By default, the Front is set to the total size of the Source drive
in megabytes. To change the settings, press “SEL” to select front or back
and use the
éê
keys to change the values in 100 MB increments.
To start “Mirror Copy”, press “START”. The next screen will prompt
you to confirm the action to start. Press “START” again.
The next screen will display a progress bar showing % completed in 5%
increments or the file name during the copy process, the transfer speed and
estimated time remaining.
You can press “STOP” any time to discontinue the copy process. The
screen will display an “Are you sure” question. To reduce the possibility
of an accidental stop, “STOP” must be pressed twice to cancel the
operation. If “Mirror Copy” is cancelled, the operation will be logged, if
logging is on, and the job completion status will be displayed.
M I R R O R C O P Y + V F Y 1 0 0 %
F R O N T = n n n n n
B A C K = 0
E S C = E X I T S T A R T = S T A R T