INTRODUCTION
9
1.
Take the pedals out of box,
grease the
thread and tighten
them using the tool
(three-arm hex key number 6) (see picture
above).
2.
Pay attention to the
direction of
rotation
while tightening. The thread on
the right pedal is right-handed (standard).
The direction of rotation for tightening is
anti-clockwise. The thread on the left
pedal is left-handed so the direction of
rotation for tightening is clockwise.
NON-DRIVE
SIDE
DRIVE SIDE
1.
Guide your
wheel into the fork
and guide the rotor between the brake pads.
2. Tighten the axle
- line up your hub with the holes at the bottom of your fork. Look to see which side of the
fork is threaded and push the axle in from the opposite side. Turn the three-arm hex key number 6 clockwise
to thread the axle into the fork.
6
9 - 13.5Nm / 6.6 - 9.9lbft
4
5
6
mm
mm
mm
7
PEDALS MOUNTING
6
FRONT WHEEL MOUNTING
TOOLS
