GreenWorks 26032, Руководство пользователя

Страница: 7 / 28

7
ELECTRICAL
ELECTRICAL INFORMATION
(See Figure 1)
W A R N I N G
To avoid electrical hazards, fire hazards, or damage to the tool, use proper circuit protection. The
Snow Thrower is wired at the factory for 120 V operation. Connect to a 120 V, 15 A circuit and use
a 15 A time delayed fuse or circuit breaker. To avoid shock or fire when the power cord is worn, cut,
or damaged in any way, replace it immediately.
This Snow Thrower has a 3-prong plug that is intended for use on a circuit that has a receptacle
like the one illustrated in Fig. 1.
Do not modify the power cord plug. If it does not match the electrical outlet, have the proper
outlet installed by a qualified electrician.
W A R N I N G
To avoid injury, when servicing the Snow Thrower, use only identical replacement parts.
GROUNDING INSTRUCTIONS
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least
resistance for electrical current and reduces the risk of electric shock. This tool is equipped with
an electric cord that has a POLARIZED plug. The plug MUST be plugged into a matching outlet
that is properly installed and grounded in accordance with ALL local codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper outlet
installed by a qualified electrician.
EXTENSION CORD
W A R N I N G
In order to reduce the risk of electric shock when operating this Snow Thrower, use only a CSA
listed extension cord that is approved for outdoor use, such as Type SJTW, 16AWG, and that has a
lower temperature rating of -40° F (-40° C).
Fig. 1
1) 3-prong plug
2) Receptacle with grounding conductor