background image

4

SAFETY INFORMATION

before attempting to use it.

• Keep the impeller clear of debris.
• Do not attempt to clear the impeller while the motor is running or while the Snow Thrower is plugged 

in it. Turn the motor off and unplug the Snow Thrower from the extension cord or the outlet.

• Keep clothing and body parts away from the rotor.
• Do not operate the motor at a faster speed than necessary. Do not run the motor at high speed 

while not clearing snow.

• Stop the motor when snow clearing is delayed or when moving from one location to another.
• Unplug the Snow Thrower when it is being transported and when it is not in use.
• After striking a foreign object, turn the Snow Thrower off and unplug it, and then inspect it for 

damage. Repair any damage before restarting and using the Snow Thrower.

• If the Snow Thrower starts to vibrate abnormally, stop the Snow Thrower immediately and 

attempt to determine the cause. Vibration is generally an indication of danger.

• Stop the motor and unplug the Snow Thrower whenever the operator is not in the operating 

position, before unclogging the impeller, and before making any repairs, adjustments, or 

inspections.

• Do not discharge snow onto public roads or near moving traffic.
• Allow the Snow Thrower to run for a few minutes after clearing snow in order to prevent moving 

parts from freezing.

• Use only the manufacturer's original replacement parts and accessories for this Snow Thrower. 

The use of unauthorized parts or accessories could lead to serious injury to the user or damage 

the Snow Thrower, and will void the warranty.

• Do not use the Snow Thrower in the hand held position. Do not pick up the Snow Thrower while 

it is plugged and running. The Snow Thrower is designed to travel along the ground.

GENERAL SAFETY RULES 

• Verify that the Snow Thrower is secure while transporting.
• Store the Snow Thrower in a dry area, locked up or high enough to prevent unauthorized use 

or damage, and out of the reach of children.

• Do not douse or squirt the unit with water or any other liquid. Keep handles dry, clean, and 

free of debris. Clean the Snow Thrower after each use. See the section entitled Cleaning and 

Storage.

• If the labels on the Snow Thrower become defaced or start to lift off, contact the Toll-Free 

Helpline, at 1-888-909-6757.

• Keep these instructions in a safe place for future reference. Refer to them often, and use them to 

instruct other users. Anyone who uses this Snow Thrower must read these instructions carefully.

• Maintain the Snow Thrower with care. Follow the instructions for lubricating and changing 

accessories.

SAVE THESE INSTRUCTIONS

Содержание 26032





























Отзывы: