background image

3

SAFETY INFORMATION

FOLLOW THESE RULES WHILE OPERATING THE SNOW THROWER

I M P O R T A N T

READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below 

may result in electric shock, fire, and/or serious personal injury.

• Walk. Do not run.
• Verify that the Snow Thrower is not in contact with anything before turning it on.
• Stay away from the discharge opening at all times. Keep face, hands, and feet away from 

concealed, moving, or rotating parts.

• Be attentive when using the Snow Thrower, and stay alert for holes in the terrain and other 

hidden hazards or traffic.

• Do not use the Snow Thrower on a gravel or crushed rock surface. Use extreme caution when 

crossing gravel/crushed rock drives, walks, or roads.

• Move up and down slopes when clearing snow. Do not go across a slope. Use caution when 

changing direction. Do not use this Snow Thrower to clear snow from steep slopes.

• Do not attempt to use the Snow Thrower on a roof or on any steeply inclined slippery surface.
• Do not operate the Snow Thrower if the guards, plates, and other safety protective devices 

are not in place.

• Do not operate the Snow Thrower near glass enclosures, automobiles, trucks, window wells, 

drop-offs, etc. without properly adjusting the angle of the snow discharge. Keep children and 

pets away from the work area.

• Do not force or overload the Snow Thrower. The Snow Thrower will perform better and safer 

when it is used at the rate that it was designed to work at.

• Do not operate the Snow Thrower at high speeds on slippery surfaces. Look behind, and 

exercise caution when backing up.

• Do not direct the discharge toward people, and do not allow anyone to move in front of the 

Snow Thrower while it is in use.

• Wear safety glasses or goggles that meet ANSI Z87.1 standards, and wear ear/hearing 

protection when using this Snow Thrower.

• Use the Snow Thrower in daylight or in good artificial light.
• Avoid accidental start-ups. Remain in the starting position when turning the Snow Thrower 

on. The operator and the Snow Thrower must be in a stable position during start-up. See the 

section entitled Starting/Stopping Instructions.

• Use the proper tool. Only use this Snow Thrower for the purpose that it was designed for.
• Do not overreach. Always keep proper footing and balance.
• Hold the Snow Thrower with both hands while it is in use. Keep a firm grip on the handles or the grips.
• Keep hands, face, and feet away from all moving parts. Do not touch or try to stop the impeller 

while it is rotating.

• If the impeller does not rotate freely due to frozen ice, thaw the Snow Thrower thoroughly 

Содержание 26032





























Отзывы: