6.5
INSTALL THE CHUTE CONTROL
ROD
21
20
24
22
23
20
1. Align the holes (20) in the upper chute control rod (23)
and lower chute control rod (24).
2. Put the hitch pin (22) through the holes (20).
3. Align the arrows in the discharge chute and snow thrower
deck. Make sure the discharge chute faces forward.
4. Put the end of the chute control rod (3) straight through
the hole (20) in the bracket. Keep the grip handle down.
5. Push the chute control rod (3) into the hole (20) behind
the deck.
6. Turn the grip handle left and right to make sure that the
discharge chute moves in the same direction.
7
OPERATION
WARNING
Wear eye protection during operation.
7.1
START THE MACHINE
2
11
1. While holding the safety switch button (11), pull the bail
lever (2) to start the machine.
NOTE
Lower the scraper to the ground to remove the snow.
WARNING
Keep bystanders a safe distance from the machine.
WARNING
Examine the work area. Remove all stones, sticks, wire,
bones, and other debris that can ricochet because of the
rotating impeller.
7.2
STOP THE MACHINE
2
1. Release the bail lever (2) to stop the machine.
WARNING
Wait until the impeller fully stops before you start the
machine again. Do not quickly turn the machine off and on.
WARNING
Pull the plug after you complete the work.
7.3
USE THE CORD RETAINER
9
English
EN
Содержание 2600502
Страница 1: ...SNA106 2600502 GWSN20130...