background image

Problem

Possible cause

Solution

A thin layer of

snow stays behind.

The scraper is

damaged.

Replace the scra-

per.

* If you cannot find the solution to these problems, please go

to the service center.

10

TECHNICAL DATA

Voltage

120 V, 60 Hz, 13 A

No load speed

2,600 RPM

Clearing width
Clearing depth
Weight 

32.2 lbs (14.6 kg)

Double-insulated construc-

tion

11

LIMITED WARRANTY

YEAR 

ANS 

AÑOS

LIMITED WARRANTY

GARANTIE LIMITÉE

GARANTÍA 

LIMITADA

3

Greenworks hereby warranties this product, to the original

purchaser with proof of purchase, for a period of three (3)

years against defects in materials, parts or workmanship.

Greenworks, at its own discretion will repair or replace any

and all parts found to be defective, through normal use, free

of charge to the customer. This warranty is valid only for

units which have been used for personal use that have not

been hired or rented for industrial/commercial use, and that

have been maintained in accordance with the instructions in

the owners’ manual supplied with the product from new.

ITEMS NOT COVERED BY WARRANTY:

1. Any part that has become inoperative due to misuse,

commercial use, abuse, neglect, accident, improper

maintenance, or alteration; or

2. The unit, if it has not been operated and/or maintained in

accordance with the owner's manual; or

3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, blade

sharpening;

5. Normal deterioration of the exterior finish due to use or

exposure.

HELPLINE:

Warranty service is available by calling our toll-free helpline,

at 1-888-909-6757 .

TRANSPORTATION CHARGES:

Transportation charges for the movement of any power

equipment unit or attachment are the responsibility of the

purchaser. It is the purchaser’s responsibility to pay

transportation charges for any part submitted for replacement

under this warranty unless such return is requested in writing

by Greenworks.

USA address:

Canadian address:

Greenworks Tools

Greenworks Tools Canada Inc.

P.O. Box 1238

1110 Stellar Drive Unit 102

Mooresville, NC 28115

Newmarket, ON, L3Y 7B7

13

English

EN

20 in

.

 (50.8 cm)

10 in

.

 (25.4 cm)

Содержание 2600502














Отзывы: