GreenWorks 2600502, Руководство оператора

Страница: 9 / 13

NOTE
Do not plug the extension cable into the outlet until it has
been connected to the cord retainer and plugged into the
machine.
1. Fold the extension cable to form a tight loop near the
retainer.
2. Push the loop through the bottom hole in the retainer.
3. Move the loop over the retaining clip, and pull until the
cable is secured.
7.4 ADJUST THE DISCHARGE CHUTE
3
7
You can adjust the discharge chute 180° to change the snow
direction.
1. Turn the grip handle (3) left to move the discharge chute
(7) to the left.
2. Turn the grip handle (3) right to move the discharge chute
(7) to the right.
7.5 ADJUST THE CHUTE DEFLECTOR
7
You can adjust the chute deflector up and down to change the
throwing distance of the snow.
WARNING
Release the bail switch before you adjust the chute
deflector.
WARNING
Do not push the deflector so far forward that a gap shows
between the deflector and the chute.
1. Push and hold the trigger on the chute deflector.
2. Move the chute deflector (7) up to increase the snow
distance.
3. Move the chute deflector (7) down to decrease the snow
distance.
7.6 OPERATION TIPS
• If it is possible, clear the snow with the direction of the
wind.
• In strong winds, lower the chute deflector to direct the
snow to the ground.
• When you complete the work, let the machine operate for
a while to prevent ice formation in the discharge chute.
• If the snow is deeper than 8", decrease the speed and let
the machine work at its own rhythm.
• Do not use the scraper to remove compact snow and ice.
8 MAINTENANCE
WARNING
Disconnect the extension cord before maintenance.
CAUTION
Use only approved replacement parts.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
8.1 GENERAL MAINTENANCE
• Before each use, examine the machine for damaged,
missing, or loose parts such as screws, nuts, bolts and
caps.
• Tighten correctly all the fasteners and caps.
• Clean the remaining snow on the machine with a brush.
10
English
EN