GreenWorks Pro 2608402CO, Руководство оператора

Страница: 12 / 14

Problem Possible cause Solution
The machine does
not start.
The battery is not
charged.
Charge the battery
by following the
procedures in the
battery and charg-
er manual.
The switch is de-
fective.
Have the switch
replaced by an au-
thorized service
center.
Battery is too cold. Remove battery
from snow throw-
er. Place battery on
charger and allow
to charge for 10
minutes or until
the changing light
turns green. Re-
move from charger
and install in snow
thrower for use.
Blue LED light is
Flashing - Battery
is in Low Voltage
Protection.
Bring the Battery
and Charger in to a
warm area. Place
the Battery in the
charger and allow
for the battery to
reach room tem-
perature or when
the light on the
charger is flashing
Green. Once
charger is flashing
green, take the bat-
tery and place it in
the unit to begin
work.
Blue LED light is
always on - Bat-
tery Temperature
is Low.
Bring the Battery
and Charger in to a
warm area. Place
the Battery in the
charger and allow
for the battery to
reach room tem-
perature or when
the light on the
charger is flashing
Green. Once
charger is flashing
green, take the bat-
tery and place it in
the unit to begin
work.
Battery may re-
quire service or re-
placement.
Call toll free help-
line, at
1-855-345-3934 or
replace battery.
Problem Possible cause Solution
The engine is on,
but the impeller
does not turn.
The belt is dam-
aged.
Replace the belt.
A thin layer of
snow stays behind.
The scraper is
damaged.
Replace the scra-
per.
* If you cannot find the solution to these problems, call
1-855-345-3934.
11 TECHNICAL DATA
12 LIMITED WARRANTY
M
EI
LL
EU
R
DA
NS
SA
CATÉGORIE • M
EJO
R E
N
C
LA
S
E
BES
T IN CLASS
GARANTIE OUTIL &
BATTERIE • GARANTÍA PARA
HERRAMIENTAS Y BATERÍAS
Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of four (4)
years against defects in materials, parts or workmanship.
Greenworks, at its own discretion will repair or replace any
and all parts found to be defective, through normal use, free
of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
have been maintained in accordance with the instructions in
the owners’ manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to misuse,
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
11
English
EN
Voltage 80 V
No load speed 1800 / 1950 RPM
Clearing width 22 in (55.9 cm)
Clearing depth 13 in (33.0 cm)
Impeller size 18 in (45.7 cm)
Weight (without battery
pack)
Battery
Charger
Double-insulated construc-
tion
57.9 lbs.
BAB727 and other BAB
series
2901402 and other BAB
series