background image

Item

Temperature

Battery charging temperature
range

39 ˚F (4 °C) ~ 104 ˚F (40 ˚C)

Charger operation tempera-
ture range

39 ˚F (4 °C) ~ 104 ˚F (40 ˚C)

Battery discharging tempera-
ture range

1.4 ˚F (-17 ˚C) ~ 113 ˚F (45
˚C)

Battery storage temperature
range

32 °F (0 °C) ~ 113 °F (45
°C)

3

SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this tool.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
tool better and safer.

Symbol

Explanation

Direct current

Precautions that involve your safety.

Read and understand all instructions
before operating the product, and fol-
low all warnings and safety instruc-
tions.

Wear eye protection.

Thrown objects can ricochet and re-
sult in personal injury or property
damage. Wear protective clothing and
boots.

Keep bystanders a safe distance from
the machine.

Keep hands away from the discharge
area.

Stay away from moving parts. Keep
all guards and shields in place.

Keep feet out of impeller. Keep feet
away from rotating impeller.

Stop the motor and remove the bat-
tery before leaving the product.

4

RISK LEVELS

The following signal words and meanings are intended to
explain the levels of risk associated with this product.

SYM-

BOL

SIGNAL

MEANING

DANGER

Indicates an imminently haz-
ardous situation,which, if not
avoided, will result in death
or serious injury.

WARNING

Indicates a potentially hazard-
ous situation,which, if not
avoided, could result in death
or serious injury.

CAUTION

Indicates a potentially hazard-
ous situation, which, if not
avoided, may result in minor
or moderate injury.

CAUTION

(Without Safety Alert Sym-
bol) Indicates a situation that
may result in property dam-
age.

5

ENVIRONMENTALLY SAFE

BATTERY DISPOSAL

The toxic and corrosive materials below are in the batteries
used in this machine: 

Lithium-Ion, a toxic material.

 

WARNING

Discard all toxic materials in a specified manner to prevent
contamination of the environment. Before discarding
damaged or worn out Li-ion battery, contact your local
waste disposal agency, or the local Environmental
Protection Agency for information and specific instructions.
Take the batteries to a local recycling and/or disposal center,
certified for lithium-ion disposal.

4

English

EN

Содержание 2608402CO















Отзывы: