background image

 

WARNING

Keep bystanders a safe distance from the machine.

 

WARNING

Examine the work area. Remove all stones, sticks, wire,
bones, and other debris that can ricochet because of the
rotating impeller.

8.4

STOP THE MACHINE

1. Release the bail lever (1) to stop the machine.

 

WARNING

Wait until the impeller fully stops before you start the
machine again. Do not quickly turn the machine off and on.

8.5

LED LIGHT

1. To turn on the LED light (33) for night time snow

removal, press the light switch (25).

2. To turn off the LED lights (33), press the light switch (25)

again.

8.6

LED LIGHT

1. Press the speed switch (26) towards the rabbit symbol for

higher impeller speed and discharge distance in heavy
conditions.

2. Press the speed switch (26) towards the turtle system to

decrease the impeller speed for greater runtime in light
conditions.

8.7

ADJUST THE DISCHARGE CHUTE

You can adjust the discharge chute 180° to change the snow
direction.

1. Push the chute-rotation handle (11) forward to move the

discharge chute (9) to the left.

2. Push the chute-rotation handle (11) rearward to move the

discharge chute (9) to the right.

8

English

EN

Содержание 2608402CO















Отзывы: