Greenwit Technologies MOTORINO XP SERIES, Руководство пользователя

Страница: 45 / 52

45
The bike has limited range.
Tire pressures may be low. Check and inflate (page 1. 39).
Bike is over-loaded. Reduce cargo weight; remove unnecessary items 2.
from storage compartments.
Check circuit breaker connections (page
3. 17).
Review charging procedures, make sure a full charge is being given
4.
(page 13).
Batteries are failing.
5.
The bike runs fine on flat ground but dies on hills. The motor pulses
on and off.
Low voltage cut-out is being triggered. Charge batteries.
1.
See solutions for limited range, above. 2.
The bike feels slow.
See limited range solutions above. 1.
Check CCT switch setting (page
2.
21).
Make sure the throttle body is secure and not turning with the grip, 3.
and that the grip’s range of motion is normal (see diagram on page
20).
The bike runs, but the lights, horn, signals etc do not work.
DC-DC converter disconnected or failed. Check inline fuses at voltage
1.
converter. Fuse failure almost always indicates a short in the circuits
fed by the converter, however. Refer repair to your MOTORINO™
dealer.
Alarm does not arm or disarm.
Check/replace battery in alarm remote. 1.
A brake is weak and/or lever touches the grip.
Brake fluid level low. Check brake fluid levels (page 1. 34).
Flush and bleed system (page 2. 34).
Contamination (oil, grease, wax etc.) on brake rotor and/or pads. 3.
Clean with acetone or brake cleaner spray.
Troubleshooting