Greenwit Technologies MOTORINO XP SERIES, Руководство пользователя

Страница: 42 / 52

42
MOTORINO™ Love
Your MOTORINO™ will run even better when it is clean and shiny. :-)
Washing
Use only a soft cloth, water, and a mild soap suitable for automotive
finishes. Gently rain water down onto the bike, especially around the dash
or wheels, being careful not to force it into areas it does not normally go.
Wash from top to bottom to avoid scratching the more visible parts of
the bike with grit from the lower areas. Rinse off any soap residue before
it can dry. Dry the finish with a scratch-free, soft, perfectly clean chamois
cloth.
Rinsing the bike immediately after riding in on muddy or salted roads is
strongly recommended.
CAUTION!
DO NOT use a pressure washer or other concentrated jet of wa-
ter. There is considerable risk of forcing water past seals and into
bearings, shocks, the motor, electrical connectors, storage areas,
light fixtures, and even damaging the finish.
Waxing
Wax will help protect painted and chromed surfaces and make it easier to
remove dirt and road tar. Only use products suitable for fine automotive
finishes.
Protecting Metal Surfaces
Exposed chromed and other metal surfaces are subject to rust and corro-
sion, especially when used on salted streets. Regular use of a protective
wax or spray product is recommended.
WARNING!
DO NOT allow wax, oil, grease, or other contaminants to remain
on brake parts or tires. Use brake cleaner or acetone to clean
the brake rotors and pads if necessary. Use dish soap and warm
water to clean tires.
MOTORINO™ Love