7
ARC® Cell Replacement
1. Disconnect unit from power source.
2. Remove the Cover’s two screws along the
top edge with a #1 Phillips-Head screw
driver.
3. Tilt the Cover away from the top of the unit.
4. Remove the Black Grille by sliding it out.
5. Locate the ARC Cell and gently lift it up out
of the case.
6. Disconnect the power cable to your old
ARC Cell and replace it with your new
ARC Cell. Ensure plug is fully seated in the
connection and the wire is fully seated into
the grommet/bulkhead.
7. Place the ARC Cell in place in the unit with
the warning label visible, making sure air
can flow through the cell.
8. Replace the Black Grille.
9. Close and secure the Cover of the unit.
10. Reconnect unit to power source.
WARNING: Make sure to disconnect the unit from its power source
before any maintenance or cleaning is done.
WARNING: Please do not throw a used ARC
®
Cell in the garbage. See
CELL DISPOSAL (PG. 9) for disposal instructions
Your ARC Cell should be replaced every year.
See Page 9 for Replacement Part Numbers.
STEP
2-3, 9
STEP 6
STEP 5&7
