6
Cleaning the Unit
ODOGard® Filter Replacement
1. Disconnect unit from power source.
2. Remove the Cover’s two screws along the top
edge with a #1 Phillips-Head screw driver.
3. Tilt the Cover away from the top of the unit.
4. Wipe everything down with a damp cloth.
5. Close and secure the Cover of the unit.
6. Reconnect unit to power source.
1. Disconnect unit from power source.
2. Remove the Cover’s two screws along the top edge
with a #1 Phillips-Head screw driver.
3. Tilt the Cover away from the top of the unit.
4. Replace the used Filter at the bottom
with the red side out.
5. Close and secure the Cover of the unit.
6. Reconnect unit to power source.
WARNING: Make sure to disconnect the unit from its power source before
any maintenance or cleaning is done.
WARNING: Make sure to disconnect the unit from its power source
before any maintenance or cleaning is done.
NOTE: We recommend replacing the Filter every 3-4 months or when noticeably contaminated.
See Page 9 for Replacement Part Numbers.
The unit will need to be cleaned inside from time to time. Be sure to use extreme
caution when doing this in order to avoid any damage to the unit or harm to yourself.
