ENGLIS
H
3
SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all instructions. Failure to
and/or serious injury.
1) Work Area
a)
Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b)
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust.
Power tools create sparks
which may ignite the dust of fumes.
c)
Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
Unmodified plugs and matching outlets will reduce risk of electric shock
2) Electrical Safety
a)
Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
b)
Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c)
Do not expose power tools to rain or wet conditions.
Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of electric shock.
e)
When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f)
Always use the power tool in conjunction with a residual circuit breaker
device.
The use of a residual circuit breaker device reduces the risk of electric
shock.
3) Personal Safety
a)
Stay alert, watch what you are doing and use common sense when
under the influence of drugs, alcohol or medication.
operating a power tool. Do not use a power tool while you are tired or
A moment of inattention
while operating power tools may result in serious personal injury.
b)
Use safety equipment. Always wear eye protection.
Safety equipment such
as dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c)
Avoid accidental starting. Ensure the switch is in the Off position before
plugging in.
power tools that have the switch On invites accidents.
Carrying power tools with your finger on the switch or plugging in
