![GREENSTAR TU-MT430 Скачать руководство пользователя страница 90](http://html1.mh-extra.com/html/greenstar/tu-mt430/tu-mt430_manual_2263048090.webp)
EN
P a g e
|
24
11 ROUTINE MAINTENANCE
11.1 Air filter
The air filter must be regularly cleaned to remove dust and dirt in order to avoid:
Carburettor malfunctions
Starting problems
Loss of engine power
Unnecessary wear to engine parts
Excessive fuel consumption
Clean the filter every 25 hours, or more regularly if conditions are exceptionally dusty.
11.1.1
Cleaning the air filter (Fig. 20)
Remove the air filter cover (16) and take out the filter. Wash it clean in warm, soapy water.
Ensure that the filter is dry before refitting it.
An air filter that has been in use for a long time cannot be cleaned completely. The filter must
therefore be replaced with a new one at regular intervals. A damaged air filter must always be
replaced.
11.2 Fuel filter
When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage.
11.3 Spark plug
The spark plug condition is influenced by:
Incorrect carburettor adjustment.
An incorrect fuel mixture (too much or incorrect type of oil).
A dirty air filter.
These factors cause deposits on the spark plug electrodes, which may result in operating
problems and starting difficulties.
If the machine is low on power, difficult to start or runs poorly at idle speed: always check the
spark plug first before taking any further action. If the spark plug is dirty, clean it and check that
the electrode gap is 0,6-0,7 mm.
The spark plug should be replaced after about a month in operation or earlier if necessary.
Recommended Spark plug type:
Always use the recommended spark plug type! Use of the wrong spark plug can damage the
piston/ cylinder. Check that the spark plug is fitted with a suppressor.
12 TECHNICAL DATA
Engine Unit
Cylinder capacity
42.7 cc
Engine power
1.35 kW
Clutch engagement speed
4400 min
-1
Idle speed
3300 min
-1
Easy start
Yes
Engine type
2 stroke air cooled cylinder
Fuel tank capacity
1,16 L
Fuel mixing ratio
40:1
Shaft Ø
26 mm
Shaft type
STRAIGHT
Shaft length
885 mm
Extended shaft length
905 mm
Crank engine
Yes
Содержание TU-MT430
