EN
P a g e
|
7
Mixing ration: 40
parts petrol to 1 part
oil
A distance of 15
metres must be
maintained
between
the
machine and third
parties!
Petrol: Ron 95 /
RON 98
The cutting tool
continues running
after it is turned off
(cutting blade /
cutting filament)
2-stroke motor oil:
ISO-L-EGD
Fire, naked flames
and smoking are
prohibited!
Risk
of
fatal
electrical
shock!
Keep at least 10 m
away from overhead
power lines!
Attention! Falling
objects. Especially
when cutting above
head height.
5 GENERAL SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to follow all warnings
and instructions may result in electric shock, fire and/or serious injury. Save
all warnings and instructions for future reference.
5.1
Work area
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
Do not operate tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a tool. Distractions can cause you to
lose control.
5.2
Personal safety
Stay alert, watch what you are doing and use common sense when operating a tool. Do
not use a tool while you are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating tools may result in serious personal injury.
Use safety equipment. Always wear eye protection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used whenever conditions require
will reduce personal injuries.
Avoid accidental starting. Ensure the switch is in the off position before plugging in.
Carrying tools with your finger on the switch or plugging in tools that have the switch on
invites accidents.
Remove any adjusting key or wrench before turning the tool on. A wrench or a key left
attached to a rotating part of the tool may result in personal injury.
Содержание TU-MT430
