25
KEMPO JuiceExtractor
GreenPower
24
Trouble shooting
GreenPower
KEMPO JuiceExtractor
How to replace the fuse and product specification
Having noise from the
Clean Gear (Twin gear)
during the product
operation
Operation failure
1) Make sure if the power supply is a reasonable power.
2) Is the power cord properly plugged to the socket?
3) Is the fuse ok?
4) Have you used the extractor excessively?
(An automatic overheating thermostat is installed in the machine to
automatically intercept the power in case of overheating generated by
excessive use and to restart it when the temperature goes down. Please wait
for about 30 minutes in such case.)
When Clean Gear is
stopped during the
product operation
1) Have you inserted too much ingredients into the Feeding Chute?
(Perform reversed rotation for 2~3 sec. when the machine is stopped owing
to the excessive insertion of ingredients.)
2) Is there any foreign substance in the Feeding Chute?
(Stop operation when a foreign substance is introduced and unplug the
machine. Disassemble it as shown in Pg.8 to remove the foreign substance.)
A
1) Are the Clean Gears (Twin gear) assembled as shown in the figure below?
(2 parts on the left, 1 part on the right)
2) Are the assembled Clean Gears (Twin gear) completely attached on the
fixing axis on the body?
3) Is there any foreign substance at the dented part where axis A is placed?
Check-up point
Problem
1. Slightly press the fuse holding knob
counterclockwise as shown in the figure.
By turning it 1/3 in the counterclockwise
direction, it can be disassembled.
2. Remove the damaged fuse and replace it
with a new one.
3. Press the knob slightly and turn it
clockwise for assembly. By turning it 1/3
in the clockwise direction, it can be
assembled.
The fuse of the product is located on the bottom of the body. For
performing fuse replacement, please follow the following
instructions.
Model
Electricity certification
Product Name
Greenpower Juice Extractor
Power
150W
Operation time
30 min.
Dimensions
1.9m Over
Net weight
405(W)*190(D)*300(H)
Electricity certification
6.5kg
