Greenmaster MOMENTUM T7, Руководство пользователя

Страница: 33 / 39

www.greenmasterfitness.com.tw
33
MAINTAINENCE
CLEANING :
Routine cleaning of your treadmill will extend the product's lif e.
•
Warning : To prev ent electrical shock, be sure the power to the treadmill is OFF and the power cord is unplugged from the
wall electrical outlet before attempting any cleaning or maintenance.
•
Important : Nev er use abrasives or solv ents to clean the treadmill. To prevent damage to the computer, keep liquids away
and keep it out of direct sunlight.
•
After each workout : Wipe off the console and other treadmill surfaces with a clean, water dampened soft cloth to
remov e excess perspiration.
•
Weekly : Use of a treadmill mat is recommended for ease of cleaning. Dirt f rom your shoes contacts the belt and
ev entually makes it to underneath the treadmill. Vacuum underneath treadmill once a week.
DECK LUBRICATION :
The walking belt has been pre-lubricated at the factory. Howev er, it is recommended that the walking board be checked
periodically for lubrication to ensure optimal treadmill perf ormance. Y our treadmill should not hav e to be lubricated usually within
the f irst y ear or 400 hours of use.
Ev ery 2 months of operation lift the sides of the walking belt and f eel the top surface of the walking board as f ar as y ou can reach.
If you feel signs of silicone, no further lubrication is required. If it feels dry to the touch, f ollow the instructions below.
Please use Lube 'N Walk (can be purchased from y our dealer or call the number on the front of the manual), or a non-petroleum
based silicone such as "Napa 8300" (available at most stores).
To apply lubricant to the walking belt :
1. Position the walking belt so that the seam is located on top and in center of the walking board.
2. Insert the spray nozzle into the spray head of the lubricant can.
3. While lifting the side of the walking belt, position the spray nozzle between the walking belt and the board approximately 6"
from the front of the treadmill. Apply the silicone spray to the walking board, moving from the f ront of the treadmill to the
rear. Repeat this on the other side of the belt. Spray approximately 4 seconds on each side.
4. Allow the silicone to "set" f or 1 minute bef ore using the treadmill.
Spray lubricant from front to back.