20
MOMENTUM T7 TREADMILL
ASSEMBLY
STEP 9
:
Connect the
Motion Control Sensor Wire - Upper
(114) coming from the Left Upright (19) to the
Motion
Console Sensor
Wire (6) coming from the Handlebar (15) as shown.
NOTE:
Make sure all wires are
recessed into the tube, do not trap or pinch any of the wires.
Attach one Handlebar (15) to the Left Upright (19). Secure using one M8 x 20mm Allen Head Bolt (25).
Repeat this entire procedure on the Right Upright (20).
x2
20
19
15
25
20
19
25
15
