RT-10 Rope Tester
52093863 REV 0
4
© 2020 Greenlee Tools, Inc.
Tool Identification
1. Clamps
2. Indicator LEDs (Red)
3. Power Button
4. Battery Door &
Thumbscrews
5. Buzzer
6. Magnets
Decals
A. Face Overlay
B. Instructions and
Warnings
Top
1
2
3
5
A
4
B
6
Bottom
2.13"
2.25"
52092995 REV 0
Color: PMS 151, PMS 109, PMS 2945 & Black
Material: Polycoated vinyl w/acrylic adhesive
per ES-482 or Eng. approved equivalent
An improperly tested rope increases the risk of electric shock when
using near high voltage lines. Touching the clamps may cause
electric shock. Always turn off unit before touching the clamps.
Test rope as close to the time of use as possible.
1. Confirm proper operation. See instructions.
2. Open clamps and place rope
across clamps.
3. Close clamps over the rope.
4. Turn unit ON. Grip the handle with one hand to keep the
tester steady.
5. With the other hand, pull the rope through the clamps. Keep a
steady pace. The tester
works in both directions.
If rope is
conductive the red LEDs will light, and the buzzer will sound.
Pulling the rope too quickly increases the risk of not detecting
conductive sections of the rope.
6. Turn the tester OFF.
7. After testing the rope, reconfirm proper operation
of the rope tester.
Greenlee Tools, Inc.
www.Greenlee.com
9V Lithium or Alkaline only
52092995 REV 0
B
