background image

Greenlee Tools, Inc.

4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

2

Dieless Battery-powered Crimping Tool

Description

The EK6IDLX, EK6IDCLX Battery-powered, High-speed 

Dieless Crimping Tool is a hand-held, self-contained 

crimping tools  intended to crimp copper cable.
This tool has Bluetooth

®

 connectivity and an LCD 

screen. 
These tools are protected by U.S. Patent No. 6,276,186, 

6,401,515, 6,718,870, 7,086,979, 7,216,523, and 

7,254,982.

Model X—FCC ID: RFRMS42; IC ID: 

4957A-MS42

USA requirements:

Responsible party: Greenlee Tools, Inc.  

Rockford, IL 61109 USA
Note: This equipment has been tested and found to 

comply with the limits for a Class A digital device, 

pursuant to Part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against 

harmful interference when the equipment is operated in 

a commercial environment. This equipment generates, 

uses, and can radiate radio frequency energy and, if not 

installed and used in accordance with the instruction 

manual, may cause harmful interference to radio com-

munications. Operation of this equipment in a residential 

area is likely to cause harmful interference in which case 

the user will be required to correct the interference at 

his own expense.
This device complies with the RF exposure SAR 

test exclusion requirements for portable devices, if a 

minimum separation distance is kept. However, the 

device shall be used in such a manner that the potential 

for human contact during normal operation is minimized.

KEEP THIS MANUAL

Table of Contents

Description ..................................................................... 2
Safety ............................................................................. 2
Purpose of this Manual .................................................. 2
Important Safety Information ..................................... 3–4
Identification ................................................................... 5
Specifications ................................................................. 5
Operation .................................................................... 6–7
cUL and UL Classified Crimps  

and Connector Table .................................................. 8–9
LCD Screen .................................................................. 10
Maintenance ................................................................. 11
Troubleshooting ............................................................ 12

All specifications are nominal and may change as design 

improvements occur. Greenlee Tools, Inc. shall not be liable for 

damages resulting from misapplication or misuse of its products.
GATOR is a registered trademark of Greenlee Tools, Inc.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Blackburn is a registered trademark of Thomas & Betts.

Canada requirements: 

This device complies with Industry Canada’s license-

exempt RSSs. Operation is subject to the following two 

conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including 

interference that may cause undesired operation of the 

device.
Le présent appareil est conforme aux CNR d’Industrie 

Canada applicables aux appareils radio exempts de 

licence. L’exploitation est autorisée aux deux conditions 

suivantes:
1) l’appareil ne doit pas produire de brouillage;
2) l’utilisateur de l’appareil doit accepter tout brouillage 

radioélectrique subi, même si le brouillage est suscep-

tible d’en compromettre le fonctionnement.

Safety

Safety is essential in the use and maintenance of 

Greenlee tools and equipment. This manual and any 

markings on the tool provide information for avoiding 

hazards and unsafe practices related to the use of this 

tool. Observe all of the safety information  provided.

Purpose of this Manual

This manual is intended to familiarize all personnel with  

the safe operation and maintenance procedures for the 

following Greenlee tool:
•  EK6IDLX Battery-powered Dieless Crimping Tool
•  EK6IDCLX Battery-powered Dieless Crimping Tool
Keep this manual available to all personnel.
Replacement manuals are available upon request  

at no charge at www.greenlee.com.

Do not discard this product or throw away!

  

For recycling information, go to www.greenlee.com.

Содержание GATOR EK6IDCLX













Отзывы: