EK628 Battery-powered Crimping Tool
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
4
Do not allow anything to contact the battery
terminals.
Do not immerse the batteries in liquid. Liquid may
create a short circuit and damage the battery.
If batteries are immersed, contact your service
center for proper handling.
Do not place the battery into a pocket, tool
pouch, or tool box with conductive objects.
Conductive objects may create a short circuit and
damage the battery.
Do not place a battery on moist ground or grass.
Moisture may create a short circuit and damage
the battery.
Failure to observe these precautions may result in
injury or property damage.
•
•
•
Do not store the battery at more than 60 °C
(140 °F). Damage to the battery can result.
Do not use another manufacturer’s charger. Other
manufacturers’ chargers may overcharge and
damage the battery.
Do not attempt to open the battery. It contains no
user-serviceable parts.
Failure to observe these precautions may result in
injury or property damage.
•
•
•
Do not perform any service or maintenance other
than as described in this manual. Injury or damage
to the tool may result.
Failure to observe this precaution may result in
injury and property damage.
Note: Keep all decals clean and legible, and replace
when necessary.
Do not dispose of batteries in a fire. They will vent
fumes and may explode.
Failure to observe this warning could result in
severe injury from harmful fumes or burns from
flying debris.
Inspect tool and dies before use. Replace any
worn or damaged parts. A damaged or improp-
erly assembled tool can break and strike nearby
personnel.
Failure to observe this warning could result in severe
injury or death.
This tool is not designed for continuous use. After
30 to 40 crimping cycles, allow the crimping tool
to cool for 15 minutes.
Do not place the tool in a vise. The crimping tool
is designed for hand-held operation.
This tool may be used in damp or wet environ-
ments, however, we recommend air drying the
tool before use if it becomes soaked. Damage
may result when the tool is operated prior to
drying out when electrical components are
soaked.
Use this tool for the manufacturer’s intended
purpose only.
Failure to observe these precautions may result in
injury or property damage.
•
•
•
•
IMPORTANT SAFETY INFORMATION
