910FS Splicer
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
5
Important Safety Information
Electric shock hazard:
Contact with live circuits could result in severe injury or death.
Wear eye protection when using this tool.
Fiber fragments can be extremely dangerous if they come into con-
tacts with eyes or skin or are ingested.
Disconnect AC power cord from AC adapter inlet or wall socket (outlet) immediately if
user observes the following or if the splicer receives the following faults:
• Fumes, bad odor, noise, or overheat occurs.
• Liquid or foreign matter falls into cabinet.
• Splicer is damaged or dropped.
If these faults occur, return unit to Greenlee service center for repair. Leaving splicer in
a damaged state could cause equipment failure, electric shock or fire, and could result
in severe injury or death.
Electric shock hazard:
• Use only AC adapter or battery charger designed for this splicer. Using an
improper AC power source could cause fuming, electric shock, or equipment
damage.
• Do not disassemble or modify splicer, AC adapter, or battery. Do not remove
or bypass any electrical or mechanical device (e.g., fuse or safety switch)
incorporated into design and manufacturing of this equipment.
• Never operate tool in an environment where flammable liquids or vapors exist.
Risk of fire or explosion could result from the tool’s electrical arc in such an
environment.
• Do not use compressed gas or canned air to clean tool. They may contain
flammable materials that could ignite during electrical discharge.
• Do not touch electrodes when splicer is on and power is supplied to unit. The
electrodes generate high voltage and high temperatures that could cause a severe
shock or burn.
• Turn tool off and disconnect AC power cord before replacing electrodes.
Failure to observe these warnings could result in severe injury or death.
