19
VGN Technology
®
Technician
T
ECHNICIAN
I
NFORMATION
In rare circumstances, the factory may request additional information pertaining
to the operational performance of the controller. Several screens are provided
with low-level firmware information.
U
SER
S
AVE
Alarm History Reset is used to clear the historical record of alarms. Press enter
to advance the cursor. Then press the arrow buttons to toggle the no/yes state.
Press enter.
NOTE:
When changed to YES, the field will automatically revert to NO after a few
seconds.
BMS C
ONFIG
Because no content exists under the BMS Configuration menu, only the end
screen is displayed.
S
ERVICE
S
ETTINGS
Working Hours Set
Because no content exists under the Working Hours Set menu, only the end
screen is displayed.
Probe Adjustment
Because no content exists under the Probe Adjustment menu, only the end
screen is displayed.
Control Loops
Because no content exists under the Control Loops menu, only the end screen is
displayed.
M
ANUAL
M
ANAGEMENT
Analog Inputs
Because no content exists under the Analog Inputs menu, only the end screen is
displayed.
Digital Inputs
Because no content exists under the Digital Inputs menu, only the end screen is
displayed.
Relay Outputs
Because no content exists under the Relay Outputs menu, only the end screen is
displayed.
Analog Outputs
Because no content exists under the Analog Outputs menu, only the end screen
is displayed.
Information
GREENHECK FAN CORP
Code:
Version: 0.1.000
Date: 09/06/15
Bios: 6.27
09/07/04
Boot: 5.00
09/07/04
Alarm History Reset
This will clear the
Alarm history
Continue? No
Information
Board type:
pCO5+
Board size:
Medium
Total flash:
2048KB
RAM: 1024KB
Built-In type:
Main cycle:
9.5cycle/s
105ms
Information
Power Cycle Status
Last Off Time
5/05/16
10:54:45
Last On Time
5/05/16
16:03:37
Length Time Off
Days: 0 Hrs: 5 Min: 8
