Issue 9 February 2006
48
5. Put the screens back and wash the outside of the hopper.
6. Lift out the radiator screen and clean thoroughly. Re-fit the screen.
7. Swing open rear water tank and wash the radiator matrix taking
care not to damage the cooling fins.
8. Disengage the hold-open pin and close the fan casing ensuring
that the locking knobs are tightly secured.
9. Wash the rest of the machine checking that the area around the
hydraulic tank is clean, taking care not to jet wash close to the hydraulic
oil filler/vent.
10. Check area between hydraulic tank and main hydraulic pump.
11. Refit the side panels, start the engine and lower the hopper. Switch off the engine.
