Green Gear Cycling Bike Friday OSATA Скачать руководство пользователя страница 21

Страница: 21 / 26

www.bikefriday.com

800-777-0258 • +1-541-687-0487

Install the Trailer Wheels
Insert the axle bolt through

the recessed bearing side

of the wheel. Once the

bolt is in the wheel; the

head of the bolt should

be flush with the wheel, it

should not stick out. If the

bolt head sticks out, the

wheel needs to be flipped

around to the other side.

Fig. 66 Install trailer wheels.

Insert the Axle and Wheel

into the T Piece.
Note, both the T piece

and the axle have a small

hole in them, you will be

lining up these holes and

then placing the wheel pin

through both holes.

Fig. 67 Line up the holes.

Accessories: TravelTrailer

Insert the Clevis Pin
Insert the clevis pin through

the hole in the axle to secure

the wheel. If the clevis

pin does not readily slide

through the holes, try rotat-

ing the bolt 180 degrees to

provide better alignment of

the holes.

Fig. 68 Insert the clevis pin.

Dual Drive Hub Specifics
Installing the Rear Wheel:
Install the rear wheel into the rear frame dropouts and bolt into

place. With a small flat head screwdriver, screw the shift rod into

the drive side end of axle. Depress the button on the click bock

and move the click box onto the end of the rear hub axle.

Removing the Rear Wheel:
To remove a Dual Drive hub, shift into gear one (low), push the

button on the click box and pull the click box away from the

wheel. Using a small flat screwdriver, remove the shift rod to pro-

tect against bending and other damage, and unbolt the wheel.

Dual Drive Hub

Bike Friday Service Overhauls

All of this, and the health of other components, can be checked

by our mechanics during your optional yearly Overhaul.

A Bike Friday Overhaul includes:

• Check all components for wear and recommendations on

replacements.

• Strip frame and clean components (optional solvent tank

option).

• Clean and optional alignment of the frame.

• Replace stickers.

• New cables and housing.

• New bar tape, where applicable.

• Test ride and packing.

Don’t hesitate to call Bike Friday’s Customer Service Depart-

ment for help: 1-800-777-0258 (U.S.) or 1-541-687-0487 (world),

or email [email protected]

Содержание Bike Friday OSATA



























Результаты поиска

Содержание Bike Friday OSATA

Отзывы:

Бренды по названию

Популярные бренды

Green Gear Cycling Bike Friday OSATA, Инструкция по использованию

Результаты поиска

Содержание Bike Friday OSATA

Отзывы:

Бренды по названию

Популярные бренды