36
37
www.bikefriday.com
www.bikefriday.com
800-777-0258 • +1-541-687-0487
800-777-0258 • +1-541-687-0487
Fig. 54
Fig. 55
Fig. 56
Fig. 57
Place saddle / seatmast on
West wall with the mast
pointing East, through the
rear end.
Install the crush protector.
Place the bottom flange in
the case in the most central
spot as possible, install the
rod and this then provides a
guide as to the height of the
case. [Figure 54]
FOR TRAILER OWNERS Install
trailer frame, running the
long section along the South
edge. [Figure 55]
FOR TRAILER OWNERS Place
one of the trailer wheels in
the Northwest corner.
[Figure 56]
Install the axle protectors on
both wheels and place the
rear wheel, cog up, onto the
case, toward the East. Avoid
the rear wheel axle resting
directly on the chainring.
Rotate the crank arm as nec-
essary to let the wheel sit as
low as possible. [Figure 57]
Packing: OSATA in TravelCase
Packing: OSATA in TravelCase
Fig. 58
Fig. 59
Place the front wheel in,
overlapping the rear. You
may need to offset it to the
West a bit. You will likely
need to nest the rear cas-
sette cogs in the front wheel
spokes and the front hub
nested into the rear wheels’
spokes. [Figure 58]
FOR TRAILER OWNERS Place
the second trailer wheel in
the Northeast corner, above
the rear wheel and below
the front wheel. [Figure 58]
Place accessories such as a
folding rear rack in any extra
space.
Install the top flange of the
crush protector.
Ensure all packed pieces sit
below level of the crush pro-
tector’s top flange.
[Figure 59]
