Green Feathers NC701G, Быстрый старт

Страница: 4 / 20

4
1. Camera Setup
Before installing the camera in your nest
box, wire it up inside the house first to
make sure everything is working as it
should.
The first thing to do is to remove the lens
cap and power up the camera using the
mains power supply.
Info-Circle
Note that the camera does not emit a
visible glow, even when the night vision is
active.
Power up the receiver and check the
channel number indicated by the red
light matches the number on the Wireless
Channel Stick on the rear of the camera.
Antenna
Lens
Power in
IR LEDs
Bracket
Insert the yellow AV cable plug into
VIDEO1 and the white one into AUDIO1 .
This will take the output of the camera feed
to your TV, monitor or recorder.