Green Feathers NC701G, Быстрый старт

Страница: 9 / 20

Rear of
Box
Inside Box
Anti-slip
pins
Mount the Camera in Nest Box
A. Installing in one of our bird boxes:
Pass the 5M screw provided through the pre-
drilled hole in the back of the box, screwing
into the nut on the easy mount bracket.
Our innovative anti-slip bracket design will
hold the camera in place against the wood.
There is a gap in the eaves of the box through
which to pass your cables.
B. If you do not have one of our bird boxes:
Following the diagram (right), drill a 6mm hole
at or above 210mm from the base of your box.
Then follow the A instructions above.
M
Check the angle of the camera by looking
at the image on the TV and make any
adjustments if need be.
210mm min.
Larger boxes
Smaller boxes