Gree YAC1FB9, Руководство по обслуживанию

Страница: 67 / 182

65
Technical Information
Service Manual
YAN1F6(WiFi)
MODE
FAN
SWING TURBO
SLEEP TEMP
WiFi
LIGHT CLOCK
TIMER
ON
TIMER
OFF
Buttons on remote controller
Introduction for icons on display screen
Set temperature
Health mode
Scavenging function
Sleep mode
8 ℃ heating function
X-FAN function
WiFi function
Light
Set temp.
Outdoor ambient
temp.
Indoor ambient
temp.
Clock
Set time
TIMER ON / TIMER OFF
Up & down swing
Turbo mode
Send signal
Auto mode
Cool mode
Child lock
Operation mode
Dry mode
Fan mode
Heat mode
I feel
Set fan speed
Temp.
display type
Introduction for buttons on remote controller
Notice
：
● This is a general use remote controller. It could be used for
the air conditioner with multifunction. For the functions which
the model doesn't have, if press the corresponding button on
the remote controller, the unit will keep the original running
status.
● After putting through the power, the air conditioner will give
out a sound. Power indicator " " is ON. After that, you can
operate the air conditioner by using remote controller.
● Under on status, pressing the button on the remote
controller, the signal icon " " on the display of remote
controller will blink once and the air condition-er will give out
a "di" sound, which means the signal has been sent to the air
conditioner.
● Under off status, set temperature and clock icon will be
displayed on the display of remote controller (If timer on,
timer off and light functions are set, the corresponding
icons will be displayed on the display of remote controller at
the same time); Under on status, the display will show the
corresponding set function icons.
button
Press this button to turn on the unit. Press this button again to
turn off the unit.
button
MODE
Press this button to select your required operation mode.
AUTO COOLD RY FAN HEAT
● When selecting auto mode, air conditioner will operate
automatically according to ex-factory setting. Set temperature
can't be adjusted and will not be displayed as well. Press "FAN"
button can adjust fan speed. Press "SWING" button can adjust
fan blowing angle.
● After selecting cool mode, air conditioner will operate under
cool mode. Press "▲" or "▼" button to adjust set temperature.
Press "FAN" button to adjust fan speed. Press "SWING" button to
adjust fan blowing angle.
● When selecting dry mode, the air conditioner operates at low
speed under dry mode. Under dry mode, fan speed can't be
adjusted. Press "SWING" button to adjust fan blowing angle.
● When selecting fan mode, the air conditioner will only blow
fan, no cooling and no heating. Press "FAN" button to adjust fan
speed. Press "SWING" button to adjust fan blowing angle.
● When selecting heat mode, the air conditioner operates under
heat mode. Press "▲" or "▼" button to adjust set temperature.
Press "FAN" button to adjust fan speed. Press "SWING" button to
adjust fan blowing angle.
Notice
：
● For preventing cold air, after starting up heat mode, indoor
unit will delay 1~5 minutes to blow air (Actual delay time
depends on indoor ambient temperature).
● Set temperature range from remote controller: 16~30°C(61-
86°F); Fan speed: auto, low speed, medium speed, high
speed.
● Cooling only unit won't receive heat mode signal. If setting
heat mode with remote controller, press " " button can't start
up the unit.